We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Plastic Extrusion.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Plastic Extrusion - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Plastic Extrusion Product List

1～30 item / All 30 items

Displayed results
Plastic Extrusion Molding [Material] 'Styrene-based Elastomer'

Plastic Extrusion Molding [Material] 'Styrene-based Elastomer'

Ideal for outer materials of tubes and plastic cores! Introducing a resin with properties similar to rubber.

At Katsuron Co., Ltd., we are engaged in the extrusion molding of "styrene-based elastomers." We use styrene-based rubber (SBC) as the base polymer. This results in a resin that possesses properties similar to rubber. It is suitable for applications such as tubing and exterior materials for plastic cores, and there are grades available that can meet food and medical requirements. ☆ You can rely on us for plastic extrusion molding. 【Features】 ■ Uses styrene-based rubber (SBC) as the base polymer ■ Possesses properties close to rubber ■ Can accommodate food and medical applications *For more details, please refer to the PDF materials or feel free to contact us.

  • Other polymer materials
  • Resin mold
  • tube
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [Polycarbonate standard pipe]

Plastic extrusion molding [Polycarbonate standard pipe]

Introducing a pipe that is tasteless, odorless, and non-toxic, with excellent transparency and a wide range of applications!

The "Polycarbonate Standard Pipe" is an original product that has been affectionately known as "Panlight Pipe" since its establishment. Teiyo has launched and standardized polycarbonate resin pipes. We keep a variety of sizes of products in stock, all produced under a comprehensive quality management system. Utilizing the "transparency," "toughness," and "heat resistance" of polycarbonate resin, these pipes are active in a wide range of fields. 【Features】 ■ Excellent transparency ■ Strong against impact and does not break ■ Superior heat resistance (130°C) and cold resistance (-100°C) ■ Excellent creep characteristics, with minimal dimensional changes due to moisture, temperature, and time ■ Excellent electrical properties as an insulating material ■ Tasteless, odorless, and non-toxic, used across a wide range of applications *For more details, please refer to the PDF document or feel free to contact us.

  • Contract manufacturing
  • Processing Contract
  • tube
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [knurling processing]

Plastic extrusion molding [knurling processing]

Combining light diffusion properties, we propose diverse lighting possibilities. Light is diffused through the prism effect! The possibilities for various lighting designs are expanding!

"Knurling processing" proposes various lighting possibilities in conjunction with the light diffusion properties of the selected materials. The optical design of the inner surface shape of the pipe (which diffuses light through a prism effect) expands the possibilities for various lighting designs. By using materials with light diffusion and flame retardant properties in "knurling (using light diffusion grade)," it is possible to impart light diffusion and flame retardant properties to extruded products, and various color variations are also possible. 【Processing Technology】 ■ 180° (360°) Knurling Processing ■ Knurling Processing (when LED is lit) ■ Knurling (using natural grade) ■ Knurling (using light diffusion grade) *For more details, please refer to the PDF materials or feel free to contact us.

  • Processing Contract
  • Other lighting equipment
  • Other lighting equipment
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding: Challenge of Large-Diameter Pipes (Outer Diameter Φ230)

Plastic Extrusion Molding: Challenge of Large-Diameter Pipes (Outer Diameter Φ230)

Through technical examination and equipment introduction, we are now able to accommodate the sizes that have been highly requested! Case study materials are currently being distributed.

Our engineering plastic large-diameter pipes previously had a maximum outer diameter of φ210, but through technical research and equipment introduction, we are now able to mold pipes with an outer diameter of Φ230. This allows us to meet the demand for sizes that have been frequently requested. Additionally, we can accommodate long-length products as well. Please feel free to contact us when you need assistance. 【Various Sizes】 ■ Basketball (Size 5: Φ220) ■ Soccer Ball (Size 3: Φ192) ■ Hard Baseball (Φ73) ■ Golf Ball (Φ43) 【Introduction of Polycarbonate Pipe Application Example】 Size: PC (N) Φ200 x 2.0t x 500L Application: Decorative Lantern *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [Meta Marble]

Plastic Extrusion Molding [Meta Marble]

The new color with a deep hue has a very high-quality atmosphere! You can enjoy the pearlescent effect even more.

Teijin Limited has added two new colors to its extruded products made from PC/PMMA-based polymer alloy (Meta Marble). The lineup now includes Purple and Pink. The new deep colors create a very high-quality atmosphere, allowing for an enhanced pearlescent effect. Our company is committed to the keyword "beautiful extruded products," including PC natural pipes. 【Color Lineup】 ■ White ■ Purple ■ Pink *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Extrusion Machine
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [High Appearance Acrylic Pipe]

Plastic Extrusion Molding [High Appearance Acrylic Pipe]

Successfully improved to an appearance close to that of cast products! Achieved beauty.

Traditionally, extruded products had factors that diminished their beauty, such as welds and die lines from the die. Our company has implemented a significant review of the production process as part of our efforts to enhance the appearance of acrylic pipes. The "High Appearance Acrylic Pipe" has successfully improved to an appearance close to that of cast products, achieving beauty. 【Features】 ■ Improved to an appearance close to that of cast products ■ Achieved beauty *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [pink pipe]

Plastic extrusion molding [pink pipe]

Control the content of various masterbatches! It is possible to achieve "transparency" and "subtlety."

Our company has made it possible to customize pink pipes that evoke the images of "kindness," "softness," and "love." By controlling the content of several types of masterbatches, we can achieve "transparency" and "subtlety." An LED light source can be installed inside the pipe to obtain a "gentle" and "soft" light. 【Features】 ■ Pink color that evokes kindness, softness, and love ■ Control of the content of several types of masterbatches ■ Ability to achieve transparency and subtlety ■ Obtain gentle and soft light *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [various large-diameter pipes]

Plastic extrusion molding [various large-diameter pipes]

It is possible to impart special effects! Molding can be done with various thermoplastic resins, and bending processing is also possible.

Teiyo can produce various sizes of large-diameter pipes (φ210) and below. By selecting the raw materials, it is possible to impart special effects such as color, light diffusion, and UV cut. Additionally, we can mold various types of thermoplastic resins and perform bending processing as well. For inquiries about large-diameter plastic pipes, please feel free to contact us. 【Sizes】 ■ Soccer ball (Size 3: φ192) ■ Softball (Size 3: φ95) ■ Hard baseball (φ73) ■ Golf ball (φ43) *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [High Surface Hardness Polycarbonate Pipe]

Plastic Extrusion Molding [High Surface Hardness Polycarbonate Pipe]

The surface hardness of the PC pipe has increased, and various profiles can be molded! It has excellent impact resistance.

Generally, PC (polycarbonate) excels in mechanical strength but has a tendency to be vulnerable to scratches. By using high surface hardness polycarbonate developed by Teijin Limited, it is possible to maintain the inherent transparency and mechanical strength of PC while enabling the molding of PC pipes and various profiles with increased surface hardness. When conducting scratch tests using an H pencil, the results showed that the surface of the high hardness resin had almost no scratches compared to general PC resin. 【Features】 ■ Maintains the inherent transparency and mechanical strength of PC ■ Enables the molding of PC pipes and various profiles with increased surface hardness ■ Superior impact resistance compared to general PC ■ Maintains high impact strength even after dry heat treatment and moist heat treatment *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [profile extrusion]

Plastic extrusion molding [profile extrusion]

Introduction to Irregular Extrusion (Profile)

Our unique technology is being fully utilized to meet the diverse demands of the market, resulting in the creation of various excellent products. The reliability of these products is becoming a solid foundation in each industry. *For more details, please refer to the related links or feel free to contact us.*

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [round bars and thick plates (resin materials for machining)]

Plastic extrusion molding [round bars and thick plates (resin materials for machining)]

Engineering plastics, super engineering plastics, and products for their composite materials.

It is a product made from engineering plastics, super engineering plastics, and their composite materials. The various round bars and thick plates produced with our technology are evaluated as materials with excellent homogeneity for machining. *The round bars made by Panlight are produced to order.* *For more details, please refer to the related links or feel free to contact us.*

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [Design Round Bar (With Bubbles)]

Plastic Extrusion Molding [Design Round Bar (With Bubbles)]

Due to special manufacturing, it is possible to produce not only acrylic but also polycarbonate! Bubbles are randomly embedded within the round rod!

Bubbles-filled round rods made of resin are generally known to be made of acrylic, but at Teiyo, we have made it possible to manufacture not only acrylic but also "polycarbonate" through a special manufacturing method. The bubbles are randomly distributed within the round rod. In addition to transparent products, we also offer various color variations. They are used in store displays and indirect lighting, among other applications. *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding 【Material】 'PVC'

Plastic extrusion molding 【Material】 'PVC'

Chemical resistance, flame retardancy, weather resistance, and low cost! It is a material with a long history among plastics.

At Katsuron Co., Ltd., we perform extrusion molding using "PVC." It is a material with a long history among plastics, offering a wide range of advantages such as chemical resistance, flame retardancy, weather resistance, and low cost. We also accommodate secondary processing. Our company provides "soft," which is suitable for door stops, H rubber, and stair anti-slip applications, and is excellent in processability, allows for free coloring, and is easy to secondary process, as well as "hard" and "foamed" options. 【Soft Characteristics】 ■ Good dimensional stability during extrusion molding. ■ Excellent processability with free coloring. ■ Easy secondary processing. ■ Shore A hardness can be set from 40 to 98 degrees. ■ A versatile and highly excellent material. *Please leave the extrusion molding of resins and plastics to us. *For more details, please refer to the PDF materials or feel free to contact us.

  • plastic
  • Other polymer materials
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [Material] PA (nylon-based elastomer)

Plastic extrusion molding [Material] PA (nylon-based elastomer)

Ideal for tubes and similar applications! Introducing a material with wear resistance, sliding properties, and chemical resistance.

At Katsuron, we are engaged in the extrusion molding of "PA (nylon-based elastomer)." It has mechanical strength and possesses wear resistance. It also has sliding properties and chemical resistance. It is suitable for applications such as tubes. Please feel free to contact us when you need assistance. ☆ You can rely on us for plastic extrusion molding. 【Features】 ■ Maintains mechanical strength ■ Possesses wear resistance, sliding properties, and chemical resistance * Please leave resin and plastic profile extrusion to us. * For more details, please refer to the PDF materials or feel free to contact us.

  • Other polymer materials
  • tube
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [Material] ABS

Plastic extrusion molding [Material] ABS

Introducing a material with excellent balance of mechanical strength! It is resistant to acids and alkalis, and has good workability.

At Katsuron Co., Ltd., we are engaged in the extrusion molding of "ABS." It has good processability. The balance of mechanical strength is excellent, and it is resistant to acids and alkalis. It is suitable for applications such as plastic cores. Please feel free to contact us when you need our services. 【Features】 ■ Excellent balance of mechanical strength ■ Resistant to acids and alkalis ■ Good processability ☆ Leave plastic extrusion molding to us. * For more details, please refer to the PDF document or feel free to contact us.

  • Other polymer materials
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
<Plastic Extrusion> Engineering Plastic Extrusion

<Plastic Extrusion> Engineering Plastic Extrusion

Supports the extrusion molding of polycarbonate (PC), polyamide (PA), and polyacetal (POM).

<Case Studies> - Sliding parts for escalators and elevators - Cases for transporting electronic components (magazine sticks) * We also supply various other industries. * Leave the resin and plastic profile extrusion molding to us. ★ We design and manufacture our own extrusion molds ★

  • plastic
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [Glass-Like Polycarbonate]

Plastic Extrusion Molding [Glass-Like Polycarbonate]

Compared to glass, it has excellent impact resistance, and you can expect lightweight and safety benefits!

We would like to introduce our "Glass-Like Polycarbonate." Using traditional polycarbonate resin that has the "glass color and transparency," we manufacture pipes and round rods. Our company is committed to producing "beautiful extruded products," including PC natural pipes. 【Features】 ■ Manufactured using traditional polycarbonate resin that has the "glass color and transparency" for pipes and round rods. ■ Significantly superior impact resistance compared to glass. ■ Lightweight and promising in terms of safety. *For more details, please refer to the related links or feel free to contact us.

  • plastic
  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [UV420 Clear Pipe]

Plastic Extrusion Molding [UV420 Clear Pipe]

Cuts about 40% of blue light around 420nm compared to general weather-resistant grades! A clear pipe that hardly feels yellowish.

The "UV420 Clear Pipe" is an extruded pipe developed by Teijin Limited, using a 420nm cut grade. Compared to conventional products, it cuts ultraviolet rays more effectively. It has mechanical properties equivalent to those of general weather-resistant grades. Additionally, it has transparency comparable to that of general polycarbonate and can be used for applications such as LED lighting covers. 【Features】 ■ Uses a 420nm cut grade ■ Cuts blue light by approximately 40% compared to general weather-resistant grades ■ Has mechanical properties equivalent to those of general weather-resistant grades ■ Has transparency comparable to that of general polycarbonate ■ A clear pipe that hardly shows any yellow tint *For more details, please refer to the related links or feel free to contact us.

  • Extrusion Machine
  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [knurling process 2]

Plastic extrusion molding [knurling process 2]

Transparent products, of course, respond to various color variations! The possibilities of lighting design are expanding.

We would like to introduce our "Knurling Processing." The material used is plastic. Depending on the lighting fixtures, it can contribute to weight reduction and safety, expanding the possibilities of lighting design. By creating a textured surface on the inside of the pipe, we utilize light transmission and reflection, producing various illuminations from a single light source, much like a chandelier. 【Features】 ■ Material is plastic ■ Can contribute to weight reduction and safety depending on the lighting fixtures ■ Utilizes light transmission and reflection by creating a textured surface on the inside of the pipe ■ Produces various illuminations from a single light source, like a chandelier *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [Decoration Pipe 2]

Plastic Extrusion Molding [Decoration Pipe 2]

The glittery effect is enhanced even more! By shining LED light on it, the glitteriness increases further.

We would like to introduce our decorative pipe. The "Transparent Glitter Pipe Volume 2" has enhanced the glitter effect through the examination of glitter particles, resulting in a stronger "sparkling" appearance. When exposed to LED light, the glitter effect is further intensified. Our company is committed to producing "beautiful extruded products," including polycarbonate natural pipes. 【Features】 ■ Stronger "sparkling" glitter effect ■ The glitter effect is further enhanced when exposed to LED light *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [PEEK Extrusion Processing]

Plastic Extrusion Molding [PEEK Extrusion Processing]

It is possible to shape round bars and thick plates as cutting materials! Various pipes and shaped extrusions can also be formed.

Our company is capable of "extruding PEEK resin," which has excellent properties such as mechanical strength, chemical resistance, and wear resistance. We can mold various types of pipes (from small to large diameters, thin to thick walls) and can also mold round bars and thick plates as cutting materials. Additionally, we accept orders for special extrusions (open and hollow shapes). Please feel free to contact us when you need our services. 【Features】 ■ Excellent properties such as mechanical strength, chemical resistance, and wear resistance ■ Capable of molding various types of pipes (from small to large diameters, thin to thick walls) ■ Capable of molding special extrusions (open and hollow shapes) ■ Capable of molding round bars and thick plates as cutting materials *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Extrusion Machine
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [decoration pipe]

Plastic extrusion molding [decoration pipe]

Introducing pipes with a deep, pearl-like quality and a sparkling glitter effect!

We would like to introduce our "Decoration Pipe." The "Meta Marble Pipe" is made using a PC/PMMA-based polymer alloy called Meta Marble, featuring a deep color tone reminiscent of pearls. The "Transparent Glitter PC Pipe" incorporates a special metallic powder blended in optimal amounts with transparent PC, maintaining transparency while providing a sparkling glitter effect. 【Features】 ■ Meta Marble Pipe - Made with PC/PMMA-based polymer alloy Meta Marble - Deep color tones reminiscent of pearls (pearl, marble, metallic, etc.) ■ Transparent Glitter PC Pipe - Special metallic powder blended in optimal amounts with transparent PC - Maintains transparency while providing a sparkling glitter effect *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [Transparent ABS pipe]

Plastic extrusion molding [Transparent ABS pipe]

Reproducing the excellent basic performance of ABS resin! This molded product has outstanding optical properties and detergent resistance.

We would like to introduce our "Transparent ABS Pipe." It reproduces the excellent basic properties of ABS resin, including balanced mechanical strength, dimensional stability such as molding shrinkage and linear expansion, and secondary processability such as painting, printing, and adhesion. This molded product excels in optical properties and detergent resistance. 【Features】 ■ Reproduces the excellent basic properties of ABS resin - Balanced mechanical strength - Dimensional stability such as molding shrinkage and linear expansion - Secondary processability such as painting, printing, and adhesion ■ Molded product with excellent optical properties and detergent resistance *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [High Impact Resistant Polycarbonate Pipe]

Plastic Extrusion Molding [High Impact Resistant Polycarbonate Pipe]

Maintaining toughness in harsh environments! It has superior shock resistance and water repellency compared to general PCs.

By using high-impact-resistant polycarbonate developed by Teijin Limited, it has become possible to mold PC pipes and various profiles that maintain toughness in harsh environments. The "high-impact-resistant polycarbonate pipe" excels in low-temperature impact resistance, transparency, weather resistance, chemical resistance, and water repellency. 【Features】 - Maintains excellent impact strength even in low-temperature environments below -30°C - Maintains high impact strength after dry heat treatment and wet heat treatment - When water is dripped onto the molded product, the high-impact PC shows higher water repellency *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [Special Shaped Extrusion Technology (Momiji)]

Plastic Extrusion Molding [Special Shaped Extrusion Technology (Momiji)]

It is possible to extrude complex cross-sectional profiles of various engineering plastics and super engineering plastics.

We are capable of extruding complex cross-section profiles of various engineering plastics and super engineering plastics. We have showcased the essence of our extrusion technology by expressing a complex shape resembling a maple leaf, which is characteristic of Hiroshima. Various moldings, including thick-walled processing, are possible. *For more details, please refer to the related links or feel free to contact us.*

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [complex hollow shapes (stag beetle)]

Plastic extrusion molding [complex hollow shapes (stag beetle)]

As a challenging endeavor of high difficulty and unique shapes, we took on the challenge of complex hollow forms. We gathered the essence of extrusion molding technology and attempted to express a polycarbonate beetle.

As a challenging endeavor in high difficulty and unique shapes, we took on the challenge of complex hollow profiles. We gathered the essence of extrusion molding technology to express a polycarbonate beetle. By simply changing some of the mold components, we can create extruded products with different cross-sectional shapes. *For more details, please refer to the related links or feel free to contact us.*

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic extrusion molding [stone-like plastic]

Plastic extrusion molding [stone-like plastic]

We can accommodate round bars, thick plates, and pipes. Please contact us for sizes.

It has become possible to shape round bars and thick plates with a stone-like appearance. It exudes the atmosphere of igneous rock. The base resin is polycarbonate, making it lightweight and strong! It has excellent machinability. We can accommodate round bars, thick plates, and pipes. Please inquire about the sizes. *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [Design Round Rod (With Bubbles) Part 2]

Plastic Extrusion Molding [Design Round Rod (With Bubbles) Part 2]

We can accommodate round bars, thick plates, and pipes. Please contact us for sizes.

There are many random bubble-filled round rods in the world, but at Teiyo, we can adjust the way bubbles are incorporated (quantity and size) to some extent due to our special manufacturing method. *Please note that we cannot accommodate detailed specifications for the bubbles. *For more information, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Characteristics and Applications of Plastic Extrusion Molding

Characteristics and Applications of Plastic Extrusion Molding

Characteristics and Applications of Plastic Extrusion Molding

There are various processing methods for the manufacturing of plastic products. Among the molding methods for plastics, one of the representative molding methods is extrusion molding. Since extrusion molding has both advantages and disadvantages, it is necessary to determine whether it is suitable for the manufacturing of plastic products according to their intended use. This article will explain the characteristics, advantages, and disadvantages of plastic extrusion molding, as well as the applications of plastic products manufactured through this method. If you want to keep costs down in plastic product manufacturing or wish to create shapes suited to specific applications, please refer to this information. For detailed articles, please refer to the related links below.

  • plastic
  • Rubber
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plastic Extrusion Molding [Design Round Rod (With Bubbles) Part 2]

Plastic Extrusion Molding [Design Round Rod (With Bubbles) Part 2]

Due to a special manufacturing method, it is possible to adjust the way bubbles are incorporated (quantity and size) to some extent. Case studies are included!

~ Introduction to Initiatives 1 ~ It is possible to adjust the entry method (quantity and size) to some extent. *Detailed specifications for bubbles cannot be accommodated. ~ Introduction to Initiatives 2 ~ The design round rod is an extruded product with a two-layer structure consisting of an internal (core layer) and an outer layer. By making the core layer transparent, the aim is to reduce the absorption (attenuation) of light entering from the end face of the round rod and to enhance light guiding properties. Additionally, the outer layer's resin prevents the surface from being affected by bubbles, resulting in a smooth appearance. ~ Examples of Design Round Rod Processing ~ The base resin is acrylic, which has high transparency, and when illuminated with an LED as the light source, it emits a very beautiful surface light. (Size of the photographed round rod: outer diameter 40mm) *For photography, the cut surface has been polished. *For more details, please refer to the related links or feel free to contact us.

  • Contract manufacturing
  • Plastic Extrusion

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Plastic Extrusion

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.